Synthesis of ferrites with different Zn/Fe ratios by chemical coprecipitation and the effect of heat treatments and mechanical grinding on crystallite size
Eber Manuel García Rosales, Jorge Carlos Ríos Hurtado, Ma. Gloria Rosales Sosa, Manuel García Yregoi, Blanca Idalia Rosales Sosa
Universidad Autónoma de Coahuila, Facultad de Metalurgia, Carr. 57, km 5, C. P. 25710, Monclova, Coahuila, México.
Correspondencia para autor: Ma. Gloria Rosales Sosa
Universidad Autónoma de Coahuila
Correo electrónico: mrosales@uadec.edu.mx
Resumen
Compuestos de ferrita de zinc fueron sintetizados variando proporciones de zinc y fierro mediante la técnica de coprecipitación química. Las muestras obtenidas fueron identificadas y caracterizadas por difracción de rayos X y microscopía electrónica de barrido. El tamaño de partícula fue medido con la ecuación de Debye Scherrer. A la muestra de ferrita de menor tamaño se le aplicó molienda mecánica de una y tres horas y un tratamiento térmico a 200, 300 y 400 °C. La ferrita con fórmula Zn0.8Fe1.2O4 mostró untamaño de cristalita de 9.817 nm que con el tratamiento térmico de 200°C se redujo a 8.716 nm, mientras que la molienda mecánica de una hora lo aumentó. En la síntesis de la ferrita las variaciones estequiométricas de Zn y Fe influyen en el tamaño del cristal.
Palabras clave: ferrita de zinc (ZnFe2O4), coprecipitación química, tratamientos térmicos, molienda mecánica
Abstract
Zinc ferrite compounds were synthesized varying proportions of zinc and iron by the chemical coprecipitation technique. The samples obtained were identified and characterized by X-ray diffraction and scanning electron microscopy. The particle size was measured with the Debye Scherrer equation. The smaller ferrite sample was subjected to mechanical grinding for one and three hours and a heat treatment at 200, 300 and 400 ° C. The ferrite with formula Zn0.8Fe1.2O4 showed a crystallite size of 9.817 nm which with the thermal treatment of 200 ° C decreased to 8.716 nm, while the one-hour mechanical grinding increased it. In the synthesis of ferrite, the stoichiometric variations of Zn and Fe influence the size of the crystal.
Keywords: ferrite of zinc (ZnFe2O4), chemical coprecipitation, heat treatments, mechanical grinding